Hardface T is a cored wire used for hardfacing and rebuilding components subject to metal - metal wear and moderate abrasion. The weld deposit is typical of a low alloy steel and is used for heavy multi-layer build-up work. The weld deposit is machinable. T-O - Open Arc (Self Shielded - Gasless) WireT-S - Submerged Arc WireT-G - Gas Shielded Wire TYPICAL APPLICATIONSBuild-up of earthmoving equipment such as tractor rollers, idlers, chains and drive sprockets, excavator pads, electric shovel track pads, electric shovel track carrier rolls, steel shafts, trunnions, gears, crane wheels, mine car wheels, steel mill rolls, dredge pins, dredge links, mixer parts, rail car couplings, steel mill roll couplings and any components subject to metal - metal wear. TYPICAL CHEMICAL COMPOSITIONC - 0.14%, Mn - 1.5%, Si - 0.5%, Cr - 1.6%, Mo - 0.35% TYPICAL HARDNESS30 - 35 HRC295 - 335 HB AVAILABLE SIZES1.2mm, 1.6mm, 2.0mm, 2.4mm, 2.8mm, 3.2mm
Download Instruction Manual
Download Technical Data Sheet
Download Spare Parts List
Download Safety Data Sheet
Can't find what you are looking for? Click Here to Contact Us or call our friendly team on 0800 699 353.