WA Mig Wire Hard Facing 15kg LP-G
Hardface LP-G is a genuine all-positional cored wire used for hardfacing components subject to metal-metal wear, impact and high abrasion. The wire has been specifically developed to operate in the spray transfer mode whilst welding in all positions. This economical welding wire will produce a medium alloy Martensitic steel weldmetal with good abrasion and impact resistance. The completed weld bead will have a very smooth and even contour with no spatter. The weld deposit is just machinable iwth special tools
Key Features
- LP-G - Gas Shielded
- Typical applications: This wire has many applications hwere moderate/high impact and high abrasion wear conditions prevail. Bucket teeth, bucket sides, cutting edges, conveyor chutes
- Especially applicable for all-positional weldinga nd re-instating of hardfacing sealing runs on clad wear plate fabrications
- Pre-heat should be applied to prevent relief checking
- Chemical composition: C - 0.50%, Mn – 1.8%, Si – 1.3%, Cr – 7.5%, Mo – 0.5%, V - 0.3%, Fe – Balance
- Hardness: 55 - 60 HRC, 520 - 578 HB
- Available to purchase in 1.2mm and 1.6mm
