Products tagged with 'gas consumables'

LGHSD7 Series High Speed Cutting Tips. Available in size 00 to 8

LG Series Standard Pressure Two-piece Cutting Tips for Oxy/Propane (LPG). Full range of sizes from 00 - 8.

Designed to be used with Oxygen/Acetylene. Available in sizes 00 - 5

Silicon Bronze Tig/Gas Welding Rods - Can be used for brazing brass, bronze, steel, galvanized steels and cast iron. It is available in 1.6mm, 2.4mm & 3.2mm

H62-A Adaptor - To allow the Promax Multi-Use Cutting Tips to be Fitted to Harris Type Cutting Torch

KOI-A Adaptor - To allow the Promax Multi-Use Cutting Tips to be Fitted to Koike Type Cutting Torch

C-A Adaptor - To allow the Promax Multi-Use Cutting Tips to be Fitted to Cigweld Type Cutting Torch

C-N Adaptor Nut - To allow the Promax Cutting Tips to be Fitted to Cigweld Type Cutting Torch

Phosphorus Copper / Silver Brazing Rods 3.2x1.3x500mm. Excellent for copper & brass

Low Fuming Bronze Rod - 1.6mm, 2.4mm, 3.2mm, 5.0mm

Aluminium Bronze A2 Tig Wire Available in 1kg or 4.54kg packs. In sizes 1.6mm, 2.4mm, 3.2mm

Flux Powder for Alloy Brazing

Harris Blockade 2.0mm Phosphorus-Tin-Silicon Alloy Brazing Rods Blockade is a phosphorus-tin-silicon alloy, excellent for copper to copper welding without additional flux. Sold in 20 stick tubes.

MCM-A Adaptor - To allow the Promax Multi-Use Cutting Tips to be Fitted to Meco Type Cutting Torch

Comet Type Gas Welding/Brazing Tips, available in size 6 - 20

H62-N Adaptor Nut - To allow the Promax Multi-Use Cutting Tips to be Fitted to Harris Type Cutting Torch